Looking for:
EveryKid 4-in-1 Convertible Car Seat - Evenflo® Official Site - About this item |
- Instruction Manuals for Evenflo® Baby Products | Evenflo® Official Site
Hide thumbs. Table Of Contents. Quick Links. Table of Contents. To reduce the risk of serious injury or death, read. Previous Page. Next Page. Page 2 More children are killed every year as passengers in car crashes than by any other type of injury. Using a child restraint makes a big difference. Premature Infant Use Safe Practices Recall Information for U. Public Notice for Canadian Customers Child Restraint Features Rear-facing Using the Child Restraint Rear-facing Page 4: Child Requirements This child restraint is designed for use by children in both rear-facing and forward-facing orientations.
To use this child restraint properly, children MUST meet the size and age requirements below. Page 6: Premature Infant Use Preterm and low-birth weight infants are at additional risk of breathing difficulties and heart problems when placed in a child restraint.
Evenflo requires that the evaluation recommended by the AAP be conducted for all infants born earlier than 37 weeks and all newborn infants who weigh less than 2. The back seat is the safest place for children 12 and under. See "Child Requirements" on pages 4 - 5. Never use a booster with only a lap belt, as this could cause serious injuries.
Lock your retractors if available in your vehicle. If the vehicle seat belts are not routed and fastened correctly, the child restraint may not protect the child in a crash. Seat Belt Warnings If you have any of these types of vehicle belt systems listed, these are SAFE to use to install your child restraint in the vehicle.
Items not tested with the child restraint could injure the child. Or register online at www. Evenflo Company, Inc. Headrest Adjustment Handle 2. Adjustable Headrest 3. Shoulder Belt Guide 4. Chest Clip 5. Harness Straps 6. Cup Holder both sides of seat 7. Harness Release Button under flap 8.
Recline Handle under front edge of seat 9. Tether Strap and Hook shown fastened to storage clip Instruction Manual Storage both sides of seat, see pg 82 Back Pad Your child restraint will have one of the three types of Lower Anchor Connectors shown below : 1.
When using this restraint rear-facing, DO NOT loosen the vehicle seat belt to provide more leg room as this may keep the child restraint from protecting your child. Never use tether strap when child restraint seat is rear-facing.
Make sure vehicle is on level ground. Place child restraint rear-facing on approved vehicle seat. NEVER use if parts are broken or damaged. Connect one guide, if provided, to each lower anchor by Reconnect the seat pad to the front of the child restraint. Test for tightness. If you can move the child restraint more than 2. You will need to try again, find another location for your child restraint, or install with the vehicle seat belt pg.
Make sure they recline enough for their head to lie back comfortably and safely. NOTE: In some vehicles, it may be necessary to place a tightly rolled towel or small blanket beneath the front edge of the child restraint to provide enough Secure child restraint to the vehicle seat.
Infants who weigh less than 10 kg 22 lbs MUST always be rear-facing. Connect the tether hook to the vehicle tether anchor behind the vehicle seat, as shown. Pull the strap and tighten the tether securely. Lift up on the recline handle as shown and adjust the seat recline to the upright position. Place child restraint in your vehicle forward- facing, as shown. Always make sure the bottom of the child restraint sits flat on the vehicle seat.
Route the lap belt through the forward-facing belt path and continue through the opposite opening of the child Page 52 Forward-facing Installation Checklist 1. When the child is properly restrained in a booster seat, their risk of injury in all types of crashes is reduced, as the lap and shoulder belt provides Loosen harness straps by pushing the harness release button on the front of the seat. At the same time, pull harness straps to extend completely.
Unfasten the chest clip and buckle. Lift up headrest pad. Disconnect hook-and- loop connectors on seat pad. Push the shoulder straps behind the headrest pad. Pull harness straps, chest clip, and buckle tongues through the forward-facing belt guides. Convert child restraint to booster seat. Secure booster seat to the vehicle seat. Make sure the bottom and back of the booster seat are touching vehicle seat and back. Lay the booster seat on its back. Lift up panel in seat pad to access release handle.
Lift up and hold release handle. Hold booster by armrests and lift booster base off of seat back. Attach shoulder belt clip as shown. Remove the backrest from the booster seat. Move user guide to storage slots underneath base. Place the booster seat on the vehicle seat. Replace crotch buckle if seat will be used in harness mode.
See page 2. Slide buckle tongues and chest clip up toward the headpad, and ensure the harness straps are straight and not twisted. NOTE: Shorten harness adjust strap so that it is about 3" Page Reattaching Booster Back Reattaching Booster Back To check installation of booster back: Pull up on base to check that it is securely attached.
Ensure hooks are fully engaged over bar at back of seat. When the headrest is in one of the locking positions, the adjustment handle will lock into its original position. Pull up and down on the headrest to ensure it is locked into position.
Looking under the base, turn the crotch buckle harness anchor sideways and push Slots it through the slot in the bottom of the seat shell. If there is a gap, the baby will not be comfortable.
Push the harness release button on the front of the seat. Page 69 Securing the Child in the Child Restraint 4. Insert both buckle tongues into the buckle. Pull up on the harness strap to check that the buckle tongues are fastened and to remove any slack from the webbing around the CLICK!
Loosen the harness strap by pressing the harness release button located on the front of the seat. While pressing the button, pull out on the harness straps. To unfasten the chest clip, push the release button and pull apart. Turbulence can happen with little or no warning. Fasten the aircraft seat belt.
No comments:
Post a Comment